Location 196, Nagla 4th Road, Faridabad, Haryana
Have any questions +91 9818400280
Submit your requirement info@usedpowerpresses.in
Archive

Item Tag: <span>1/16in.</span>

1/4in x 1/16in N52 Super Strong Disc Rare Earth Neodymium Magnet

1/4in x 1/16in N52 Strong Round Magnets Rare Earth Magnets Specification:Dimensions: 1/4″ x 1/16″ thick Tolerances: ±0.01in x ±0.01in Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Max Operating Temp: 176ºF (80ºC) Pull Force: Approx. 1.47 lb Material Features:Neo Magnets are made of a brittle material. These magnets are not as strong as steel. They are more like a brittle ceramic. If you let two magnets slam together, they can crack and break. This is true for magnets large and small. WARNING!!! Strong magnets should Keep away from Ironware and some easily magnetized iron products, such as monitors, bank cards, computers, televisions, mobile phones and other. These magnets are very powerful which should be handled with great care. Without parents supervised do not allow children to playing magnets as they could get injured. Especially pay attention to the small magnets , please place in somewhere children can’t reach place.

Neodymium Magnets – 1/2″ x 1/16″ – N50 Disc Magnet – Strong 13mm x 1.5mm

Item Description Neodymium Magnets – 13mm x 1.5mm – Diameter: 13mm (Approximately 1/2″) – Thickness: 1.5mm (Approximately 1/16″) – Strength: N50 – Zinc-coated for shiny finish – Rare earth neodymium magnets – Extremely strong – For commercial and industrial uses Cautions and Warnings:- CHOKING HAZARD: PLEASE KEEP OUT OF REACH OF CHILDREN AND PETS — SEEK IMMEDIATE MEDICAL ATTENTION IF SWALLOWED – These are strong magnets and should be handled with care to avoid personal injury and damage. – Magnets may break or shatter if dropped or allowed to snap against each other. – It is easy to pinch your fingers or other body parts when handling magnets – gloves and other protection are recommended. – Please keep out of reach of children and pets. – Pregnant women should not handle magnets. – Do not handle magnets if you have a pacemaker or other similar device. – Avoid contact between magnets and electronic media such as televisions, computer monitors, cameras. – Avoid contact between magnets and credit cards. – Do not heat magnets above 175°F (80°C) otherwise the magnets will begin to lose their magnetic strength. Shipping: – Orders are processed and shipped Monday-Friday. – We only ship to confirmed addresses. If your address is unconfirmed we may require further information and your order could be delayed. Terms of Sale: – All sales to international addresses are considered ‘as is’, with no warranties expressed or implied. We do not accept returns for items shipped to international customers under any circumstances. Please feel free to e-mail with any questions you may have. Thanks and God bless.

1/16″ Carbide 2 Flute End Mill – Kemmer – Slightly Used

FLUTE LENGTH. These tools are built for cutting FR4 and plastics, but should be strong enough to cut aluminum, copper, and brass under fluid. These rates are based on estimated weight. Note that these tools have been used, but should have lots of life left in them.

5Pcs 4 Flute 1/16″x1/8″x1/8″x2″ Double End Solid Carbide End Mills AlTiN Coated

STORE HOME ALL ITEMS HOT ITEMS ABOUT US ADD TO FAVS FEEDBACK CONTACT US 5Pcs 4 Flute 1/16″x1/8″x1/8″x2″ Double End Solid Carbide End Mills AlTiN Coated Specifications: 1/16″ cutting diameter x 1/8″ shank diameter x 1/8″ length of cut x 2″ overall length 4 Flutes, Double End, Solid Carbide End Mill, Helix Angle: 35°, AlTiN Coated Features: AlTiN Coated for improved performance and tool life in harder materials or high temperature applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Precision ground using the highest quality grinding wheels. High strength and hardness, abrasion resistant, practical, easy to use and durable in use. Application: End Mill Bits are used for side milling, end milling, finish machining, etc. Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc. Package Included: 5Pcs 4 Flute 1/16″ x 1/8″ x 1/8″ x 2″ Double End Solid Carbide End Mills SKU#: AP.BB.432-5 Shipping Weight: 2oz Net: 1.50oz 5 – Padded Envelope 15 – Medium FR Box Payment Payment: Paypal Preferred. Local pickup NOT available at this time. Shipping Shipping: We process your order within 1 business day upon payment(note: NOT counting holidays or weekends). International shipping also available, please note by default all international packages does not come with tracking unless upgraded to priority mail. Package transit time: please expect 3-7 business days within US, 10-20 business days to Canada, up to 25 business days all around the world. RETURN & REFUND Return & Refund: Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or there’s error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any. Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost. FeedbackWe maintain high standards of excellenceandstrive for 100% customer satisfaction!Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. ABOUT US High Quality ETL/CSA/CE/NSF/FCC – We passed every evaluation of pool products, even ASTM which for pool alarm in USA laboratory.. Customer – Service We value the service we provide and our loyal returning customers can always expect some appreciation from us, like a future service, discount or a gift. Affordable Prices We aim to make our service as reasonably priced as possible. That’s why we cut on all unessential business expenses… STORE HOME ALL ITEMS HOT ITEMS ABOUT US ADD TO FAVS FEEDBACK CONTACT US Copyright © 2017 wfyb. All Rights Reserved.

(5) 1/16″ (.0625″) CARBIDE END MILL 2 FLUTE KYOCERA 1600.0625.250

100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. MADE IN USA For sale are FIVE 1/16″ (.0625″) new two-flute, solid carbide endmills. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market and are made in the USA. They have a flute length of (.250”), and can be used for your plastic, soft media, wood, or metal (such as aluminum or copper) milling. part number: 1600.0625.250 diameter size # flutes length of cut shank OAL end-style .0625″ 1/16″ 2 .250″ .125” 1.5” center-cut Each tool has a collet locating ring for identification and quick change depth control. Kyocera Tycom products are manufactured with the finest carbide grades available. As a result, Kyocera Tycom applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 endmills. Sign up for my email newsletters by adding my eBay Store to your Favorites SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by destination – 1st class mail – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!