Location 196, Nagla 4th Road, Faridabad, Haryana
Have any questions +91 9818400280
Submit your requirement info@usedpowerpresses.in
Archive

Item Tag: <span>5/8 in</span>

GRAINGER APPROVED 4NRX9 Tubing,0.305 in. ID,3/8 in. OD,Aluminum 4NRX9

Tubing, Cleaned and Capped No, Coating Color Not Applicable, Copper Tube Type Not Applicable, Fabrication Seamless, Inside Diameter 0.305 in, Material Aluminum, Material Grade 5052, Maximum Operating Pressure 1,033 psi, Maximum Operating Temperature 400 Degrees F, Outside Diameter 3/8 in, Overall Length 6 ft, Resistance Properties Corrosion Resistant, Standards AMS4070, ASTM B210, Temper O, Tube Form Straight, Wall Thickness 0.035 in, Food and Beverage Compatibility Not Applicable Ultra Corrosion-Resistant Aluminum Tubing, 5052-0 • Temp. range: -452 Degrees to 400 Degrees F 6-ft. lengthExcellent corrosion resistance in marine atmospheres, good welding characteristics, and excellent finishing characteristics. Fatigue strength is higher than most aluminum alloys. Commonly used in transpo.

GRAINGER APPROVED 4GRV1 Pipe,Red Brass,1 x 12 In 4GRV1

Pipe, Application Air, Natural Gas, Non-Potable Water, Oil, Steam, Material Red Brass, Maximum Operating Pressure 200 psi @ 150 Degrees F, Maximum Operating Temperature 400 Degrees F, Maximum Steam Pressure 125 psi @ 150 Degrees F, Metal Pipe Construction Seamless, Minimum Operating Temperature -20 Degrees F, Nominal Pipe Size 1 in, Outside Diameter 1 5/16 in, Overall Length 12 in, Resistance Properties Corrosion-Resistant, Schedule Schedule 40, Side A Connection Type Unthreaded Schedule 40 Red Brass Unthreaded Pipe • Max. pressure: 125 psi Temp. range: -20 Degrees to 400 Degrees FResist corrosion caused by water, heat, saltwater, acids, minerals, and soils. Suitable for water, oil, natural gas, and steam applications.Meet ASTM B43 and all applicable ANSI standards.

GRAINGER APPROVED 4NTE8 Tubing,0.777 in. ID,7/8 in. OD,Aluminum 4NTE8

Tubing, Cleaned and Capped No, Coating Color Not Applicable, Copper Tube Type Not Applicable, Fabrication Seamless, Inside Diameter 0.777 in, Material Aluminum, Material Grade 6061, Maximum Operating Pressure 1,049 psi, Maximum Operating Temperature 400 Degrees F, Outside Diameter 7/8 in, Overall Length 6 ft, Resistance Properties Corrosion Resistant, Standards AMS4082, ASTM B210, Temper T6, Tube Form Straight, Wall Thickness 0.049 in, Food and Beverage Compatibility Not Applicable Aluminum Tubing, 6061-T6 • Temp. range: -452 Degrees to 400 Degrees F 6-ft. lengthSeamless tubing has very good corrosion resistance and finishability, as well as excellent weldability. Strength approximates that of mild steel. Can be fabricated by most common techniques.DrawnMeets ASTM B210 and WW-T-700/6.

GRAINGER APPROVED 4NTE9 Tubing,0.745 in. ID,7/8 in. OD,Aluminum 4NTE9

Tubing, Cleaned and Capped No, Coating Color Not Applicable, Copper Tube Type Not Applicable, Fabrication Seamless, Inside Diameter 0.745 in, Material Aluminum, Material Grade 6061, Maximum Operating Pressure 1,391 psi, Maximum Operating Temperature 400 Degrees F, Outside Diameter 7/8 in, Overall Length 6 ft, Resistance Properties Corrosion Resistant, Standards AMS4082, ASTM B210, Temper T6, Tube Form Straight, Wall Thickness 0.065 in, Food and Beverage Compatibility Not Applicable Aluminum Tubing, 6061-T6 • Temp. range: -452 Degrees to 400 Degrees F 6-ft. lengthSeamless tubing has very good corrosion resistance and finishability, as well as excellent weldability. Strength approximates that of mild steel. Can be fabricated by most common techniques.DrawnMeets ASTM B210 and WW-T-700/6.

100 Pack 4 inch Metal Cut Off Wheels with 5/8″ Arbor Angle Grinder Cutting Disc

Store Categories Store Categories Cut-Off Wheels&Grinding Wheels Flap Discs Quick Change Discs Hook & Loop Sanding Discs Paper Discs Latex Saturated Paper Discs Film Discs PSA Sanding Discs & Rolls Sanding Belts Sharpening Stones Benchstones Waterstones & Whetstones Sandpaper Sheets Sanding Sponges Detail Sander Sandpaper Surface Conditioning Discs Resin Fiber Discs Flap Wheels Sanding Sleeves & Drums Set Drill Bits Yard, Garden & Outdoor Living Household Cleaning Tools Other 100-Pack 4″ x 0.04″ Cut Off Wheels with 5/8″ Arbor, Angle Grinder Cutting Disc for Stainless Steel(INOX) & Steel Overview Enjoy a long life and high-quality output with SATC 4″ x 0.04″ x 5/8″ Right Angle Type 1 Cut Off Wheels on your grinder. Thinner design minimizes the surface area contact between the material and the cut-off wheels for faster and cleaner cuts. The premium tough aluminum oxide abrasive continuously exposed during use to maintain an aggressive cutting edge and helps getting longer useful life than standard wheels. Fully reinforced with fiberglass mesh for added safety and controlled performance, these wheels are universally suitable for steel and stainless steel (INOX) at an affordable price. Features Fast Work Precise Cutting Cleaner Burr-Free Cuts Long Life High Economic Efficiency 👍0.04 in Thickness: Thinner design minimizes the surface area contact between the material and the cut-off wheel for faster and cleaner burr free cuts. 👍Premium Coarse 60 Grit Aluminum Oxide & White Alundum Mixture Abrasive: The white aluminum oxide mixture abrasive is continuously exposed during use to maintain an aggressive cutting edge and helps getting longer useful life than standard wheels. White Aluminum Oxide features high hardness, and this highly refined ingredients will not contaminate stainless steel. 👍Double Fiberglass Mesh and Double Cloth Construction: Fully reinforced with two fiberglass mesh and two layers of cloth for definitely added safety and controlled performance. 👍Professional Grade Cutting Discs Meet EN12413 : 2019 safety requirements MPA certificate No. Z-15017 One piece cuts off a 16 mm stainless steel bar for up to 30 times, of course more on other soft materials!! Product Use Works Well On Stainless Steel (INOX) Alloy Steels Carbon Steels Cast Irons Copper, Aluminum Fiberglass, Plastic Materials Applications Cutting Out Holes Cutting of Sheet Metals Cutting Cutting of Profiles Cutting of Solid Materials Machines 4″ or 4.5″ Corded or Cordless Angle Grinders Specifications Grit: Coarse 60 Abrasive: Aluminum Oxide and White Alundum Mixture Construction: Double Fiberglass Mesh and Double Cloth Dia.: 4″ Thickness: 0.040″ Arbor Hole Size: 5/8″ Type: Flat Type 1 Max Operating Speed RPM: 15,200 Certification: MPA Z-15017 Packing Unit: 100 Pack Do wear the proper personal protective equipment (PPE). Required PPE is safety glasses along with goggles or a face shield. Wear other PPE as needed, such as gloves, dust mask, apron, etc. Shipped same-day from Hebron via USPS Priority Mail, UPS Surepost or UPS Ground, the shipment method depends on the quantity and your address. About SATC Payment Shipment Returns Policy Customer Service About SATC SATC is a professional manufacturer of abrasive tools since 1990. We exceedingly focus on product quality and customer experience, committed to providing customers with the most cost-effective products and first-class services. Payment PayPal Preferred: Credit or debit card through PayPal Shipment Every item is eligible for Free Shipping Shipment within 1 business day Most items ship via USPS First Class, USPS Mail and UPS Surepost International/Alaska/Hawaii/US Protectorates/APO/FPO/PO Box Shipping is not supported for now Returns Policy 30-day no-hassle return policy on most items Select the item you want to return and choose the appropriate reason code Please keep the label on the package or it may be difficult for the warehouse to identify the item Customer Service Quick response within 24 hours If you have any questions about product details and usage, please feel free to contact us Copyright © 2020 Dianxiaomi