Location 196, Nagla 4th Road, Faridabad, Haryana
Have any questions +91 9818400280
Submit your requirement info@usedpowerpresses.in
Archive

Item Tag: <span>PGN Bearings</span>

R16-2RS Premium Rubber Seal Ball Bearing C3 EMQ, 1″x2″x1/2″, R16rs

Dimensions: 1″x2″x1/2″Rubber seal on both sides 100% Chrome Steel for higher resistance and durability Supports 13,000 rpm Our high-quality bearing is made to reduce your replacement frequency and maintenance costModel: R16 2RS Quantity per Package: 1 Pc  Material: 100% Chrome Steel  Protection: Rubber Seal on both sides Greased / Lubricated: Yes  Bore (Inner) Diameter: 1″  Outer Diameter: 2″ Width (Thickness): 1/2″   Supported Revolutions per Minute (RPM): 13,000 Dynamic Load Rating: 8224 N Static Load Rating: 5432 N PGN’s R16rs (1″x2″x1/2″) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.

(10) R16-2RS Premium Rubber Seal Ball Bearing C3, 1″x2″x1/2″, R16rs

Dimensions: 1″x2″x1/2″Rubber seal on both sides 100% Chrome Steel for higher resistance and durability Supports 13,000 rpm Our high-quality bearing is made to reduce your replacement frequency and maintenance costModel: R16 2RS Quantity per Package: 10 Pcs  Material: 100% Chrome Steel  Protection: Rubber Seal on both sides Greased / Lubricated: Yes  Bore (Inner) Diameter: 1″  Outer Diameter: 2″ Width (Thickness): 1/2″   Supported Revolutions per Minute (RPM): 13,000 Dynamic Load Rating: 8224 N Static Load Rating: 5432 N PGN’s R16rs (1″x2″x1/2″) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.

(4) 3/4″ x 1-3/8″ Flanged Ball Bearing – Lawnmower Carts Hand Trucks Wheels

Quantity per Package: 4 Pcs  Material: 100% Chrome Steel Protection: Rubber Seal on both sides Greased / Lubricated: Yes Bore (Inner) Diameter: 3/4″ Inch Outer Diameter: 1-3/8″ Inches Supported Revolutions per Minute (RPM): 21,000 PGN’s 3/4″ x 1-3/8″ Flanged Ball Bearing is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.

(10) 6204-2RS Premium Rubber Seal Ball Bearing C3 EMQ, 20x47x14, 6204 2RS 6204rs

Dimensions: 20x47x14 mm  ISO 9001:2008 CERTIFICATE  Rubber seal on both sides  Chrome Steel (AISI 52100) for higher resistance and durability  Supports 17,000 rpm  Our high-quality bearing is made to reduce your replacement frequency and maintenance cost Model: 6204 2RS Quantity per Package: 10 Pc  Material: Chrome Steel (AISI 52100) Protection: Rubber Seal on both sides Greased / Lubricated: Yes Bore (Inner) Diameter: 20 mm Outer Diameter: 47 mm Width (Thickness): 14 mm Supported Revolutions per Minute (RPM): 17,000 PGN’s 6204RS (20x47x14) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.

(25) 3/8″ Inch Chrome Steel Bearing Balls (G25 Precision – AISI 52100)

G25 Chrome Steel Bearing BallsISO 9001:2008 Provides higher quality and durability, reducing replacement and maintenance cost Quantity per package: 25 pcs Grade: 25 Material: Chrome Steel (AISI 52100) Diameter: 3/8, 0.375 inches (9.525 millimeter) Weight: 0.12529 ounces (3.5519 grams)  PGN’s G25 3/8″ Chrome Steel Balls extremely precise and smooth surface guarantees you won’t find any defects, such as flats, pits, soft spots, and cuts.

ER70S-6 .030″ (0.8 mm) – 10-Lb – Mild Steel MIG Welding Wire

ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .030″ inches (0.8mm) Weight: 10-lbs Measurements: 8″ inch – Spool Diameter 2″ inch – Center Hole (Hub) Diameter 2″ inch – Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade.  The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11

(2 x 2-Lb Spools) E71T-11 .035″ Flux Core Welding Wire – Gasless Mild Steel MIG

Weld Your Way to Impressive Results Your choice of MIG wire can make all the difference. It can mean the difference between unsightly splatter and a smooth weld. The difference between exceptional precision and an uncontrollable arc that ruins all your hard work. Choose professional-looking results with PGN. Our E71T-11 flux core MIG wire stands out with impressive arc control and low splatter when working on mild steel. So, you end up with a beautiful weld you’ll be proud to show off. By going for a flux core MIG welding wire, you’ll have the power to ditch that shielding gas cylinder and work outdoors with the wind in your hair. Just turn on your machine, start welding, and watch the flux filling work its magic. Product Specifications:Weight: 4 PoundsPackage Inclusions: 2 x 2lb MIG Wire SpoolWire Diameter: .035″ InchesSpool Diameter: 4″ InchesSpool Center Hole Diameter: 0.75″ InchesSpool Thickness: 1.75″ InchesTensile Strength (RM MPa): 556Deposited chemical composition: (wt%) C: 0.04 / Mn: 0.48 / Si: 0.078 / S: 0.009 / P: 0.01 Cr: 0.011 / Ni: 0.008 / Mo: 0.0001 / V: 0.0001 / Cu: 0.015 Experience the Versatility Whether you’re tackling a client’s project, performing repairs in the garage, or bringing striking metal art to life, the E71T-11 flux core welding wire .035 allows you to create a variety of welds when working in all manner of positions. It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints, butt welds, and lap welds. And with a wire thickness of 0.035″, you’ll achieve great penetration without the high risk of burning through the base metal. With PGN, you also don’t just get a gasless MIG welder wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead, get MIG welding accessories you can count on.

ER70S-6 1LB 1/16″ x 16″ Mild Steel TIG Welding Rod – PGN

PGN International presents high-quality, reliable ER70S-6 welding rods perfect for mild steel and low alloy welding. Our welding rod is designed to deliver the best welding performance with its 5% silicon composition. These rods can be used for many applications – from automotive repairs to construction projects. Each wire mild steel rod melts at a temperature of 700-750º Fahrenheit. They are easy to use and require no extensive setup. Whether a skilled tradesperson or just starting, you will feel confident knowing our welding rod is your best bet for success. These welding rods require a shielding gas of 100% argon/CO2, making them perfect for anyone needing reliable welding. Our welding supplies and accessories will help you create defect-free weld deposits. Welders and construction workers can trust the consistency and quality of these ER70S6 rods. The 1 lb pack provides enough welding material for forming several sturdy welds. These top-quality welding rods feature excellent arc stability, smooth weld transfer, low spatter deposits, and minimal smoke production. Our tig welding equipment is perfect for welding mild and low alloy steel. It is also suitable for construction work, farm implements fabrication, shaft buildup, tanks, truck bodies, and general shop applications. The welding rod is appropriate for most metals needing thermal treatment. This engineering rod can be used for many projects, making them the one-stop solution for welders. No matter what kind of project you are working on, you can trust our 1lb ER70S6 to help make it happen.