Item Tag: <span>Specialty Paint</span>

Our newest model, the Mini V2 Pneumatic Vacuum for Powder Coating, is a major overhaul to our Micro V1 model. Boasting an all-in-one unit, the vacuum is stronger than ever and contains a larger diameter canister to reclaim powder. This is an all-new design, and we think you’ll enjoy the upgrade. This Micro V2 will still come with the flagship V1 handle, providing an easy handle to hold with enough light to get the job done. THIS IS THE VACUUM – No Shop Vac Required! –> Safer to use than an electric motor vacuum, these are a huge improvement to your toolset to get the job done right with safety in mind.Be sure and checkout our other vacuums!Much like our Micro V1 Pneumatic Vacuum, the Micro V2 features powder reclaiming. Powder reclaiming is awesome — it keeps your shop cleaner, you don’t have to run your spray booth filters, and most of all, the powder is not being reintroduced into the air creating a cloud around the part you’re trying to vacuum! It is your choice whether you re-use the powder or toss it, but it does help create a better, cleaner environment for your project. Almost ALL of the powder stays within the included container.The micro vacuum is designed to utilize compressed air to generate a vacuum, allowing you to attach micro nozzles to take non-cured powder off of intricate areas before heating the part. This reduces masking time, materials, etc., and allows you to remove powder from areas that you possibly can’t mask at all! This is a super precision vacuum for those very tight, micro areas, and is not designed to be a large removal vacuum.How does this awesome mini vac work? Well, simple. It comes “almost” fully assembled, ready for you to roll right out of the box! All you need to do is provide your compressed air source and air hose, connect to the supplied 1/4″ air line fitting, adjust the included air control valve to your liking, and get to work! The powder reclaimer has strong magnetization on the back side, allowing you to simply and easily attach it to your powder coating booth, or if you don’t have a metal booth, you can simply attach a steel plate to the wall for the magnets to work on. This new design also allows you to mount the unit onto two screws. We recommend regulating air supply to a maximum of 60 psi.What’s in the full kit? You’ll receive the following in the complete kit:- Powder reclaimer with micro vac attachment and spare nozzle holder with magnets to attach easily and conveniently to your metal booth or a piece of steel.- Powder reclaimer storage container- 6 feet of vacuum hose with ball valve to control vacuum flow- 2 feet of pressure hose with a flow control valve to control the pressure flow- Vacuum handle that allows you to easily and precisely remove powder from engravings, wheels, etc., which also holds a flashlight (included). The vacuum handle has magnets for easy storage on the metal walls of your booth, or a steel plate screwed to the wall!- 19 multiple-size nozzles- Flashlight (provide your AAA battery) – When the battery dies, swap it out and keep going – no need to wait for it to recharge! Light comes with a diffuser to “spread the light” better.- Literally, take it out of the box and get to work. It’s that easy!Every kit is assembled and tested before shipment – you’ll receive a working unit right out of the box unless damage occurs during shipment. If you have any questions or concerns regarding your order, please message me directly and I will do my best to take care of you!Currently being 3D printed with PETG filament for strong, long-lasting life, and very durable.I assemble these personally, as well as package and ship them. Thank you so much for looking!

Much like our other pneumatic mini vacuum for powder coating, this slimmed-down “economy” version works great. It provides you with a very capable micro vac for precision removal of powder coating powder prior to baking. Use this on base coats or intermediate coats. You no longer need to mask engraved areas on wheels, valve covers, and other intricate areas. No shop vacuum is required, this IS the vacuum – just use your compressed air source! If you are looking for a top-quality tool for your powder coating booth, look no further. This mini vac kit has been designed and tested, with amazing performance on powder coat removal. The micro vacuum is designed to utilize compressed air to generate a vacuum, allowing you to attach micro nozzles to take non-cured powder off of intricate areas prior to heating the part. This reduces masking time, materials, etc., and allows you to remove powder from areas that you possibly can’t mask at all! This is a super precision vacuum for those very tight, micro areas. Please note: This version (dubbed the “economy” version) is a stripped-down, bare version of our popular powder reclaimer version (see our other listing!), allowing you to remove the powder coat very easily without the more expensive price tag. However, please note that this product does not have a compressed air muffler and doesn’t capture the powder when you are vacuuming, so it will be slightly louder than the other model we offer, and the powder will be disbursed in air. This is not as much of an issue if you have good booth vacuum to suck away from the parts you are working on. How does this awesome mini vac work? Well, simple. It comes “almost” fully assembled, ready for you to roll right out of the box! All you need to do is provide your compressed air source and air hose, connect to the supplied 1/4″ air line fitting, adjust the included air control valve to your liking, and get to work! The pneumatic vacuum has strong magnetization on the back side, allowing you to simply and easily attach it to your powder coating booth, or if you don’t have a metal booth, you can simply attach a steel plate to the wall for the magnets to work on. Also, the nozzle portion of the tool also comes with a magnet for easily attaching to your booth wall when not in use. What’s in the full kit? You’ll receive the following in the complete kit: – Pneumatic micro vac with magnets on the backside for conveniently mounting- 6 feet of vacuum hose with ball valve to control vacuum flow (ball valve has magnet attached!)- 2 feet of pressure hose with a flow control valve to control the pressure flow- 19 multiple-size nozzles, which simply push onto or pull off of the ball valve tip- Literally, take it out of the box and get to work. It’s that easy! Every kit is assembled and tested prior to shipment – you’ll receive a working unit right out of the box unless damage occurs during shipment. If you have any questions or concerns regarding your order, please message me directly and I will do my best to take care of you! Currently being 3D printed with PETG filament for strong, long-lasting life, and very durable. Will not warp or damage in the heat of a car, shop, garage, etc., nor in direct sunlight. I assemble these personally, as well as package and ship them. Thank you so much for looking!

The compact miniature pneumatic vacuum is used for removing powder from intricate areas while powder coating. This is a high-precision vacuum! If you are looking for a top-quality tool for your powder coating booth, look no further. This mini vac kit has been designed and tested, with amazing performance on powder coat removal and retrieval, keeping the powder out of the air and from floating back onto your parts or into your booth filters. The micro vacuum is designed to utilize compressed air to generate a vacuum, allowing you to attach micro nozzles to take non-cured powder off of intricate areas prior to heating the part. This reduces masking time, materials, etc., and allows you to remove powder from areas that you possibly can’t mask at all! This is a super precision vacuum for those very tight, micro areas. Not only are you receiving a mini vac, but you will also be receiving a powder reclaimer! No spray booth? No Problem! Don’t want to waste energy using blowers/filters while utilizing your mini vac? No Problem! This powder reclaimer keeps the dust down and allows you to retain the powder that you vacuumed off the part. You are then able to re-use the powder if you really wanted to, but mainly it keeps your space clean and efficient, allowing you to keep your filters cleaner for longer! Almost ALL of the powder stays within the included container – plus, the included container fits the Eastwood powder coating guns! How does this awesome mini vac work? Well, simple. It comes “almost” fully assembled, ready for you to roll right out of the box! All you need to do is provide your compressed air source and air hose, connect to the supplied 1/4″ air line fitting, adjust the included air control valve to your liking, and get to work! The powder reclaimer has strong magnetization on the back side, allowing you to simply and easily attach it to your powder coating booth, or if you don’t have a metal booth, you can simply attach a steel plate to the wall for the magnets to work on. What’s in the full kit? You’ll receive the following in the complete kit:- Powder reclaimer with micro vac attachment and spare nozzle holder with magnets to attach easily and conveniently to your metal booth or a piece of steel.- Powder reclaimer storage container (fits Eastwood powder coating guns!)- 7 feet of vacuum hose with ball valve to control vacuum flow- 2 feet of pressure hose with a flow control valve to control the pressure flow- Vacuum handle that allows you to easily and precisely remove powder from engravings, wheels, etc., which also holds a flashlight (included). The vacuum handle has magnets for easy storage on the metal walls of your booth, or a steel plate screwed to the wall!- 19 multiple-size nozzles – Flashlight (provide your AAA battery) – When the battery dies, swap it out and keep going – no need to wait for it to recharge! Light comes with a diffuser to “spread the light” better. – Literally, take it out of the box and get to work. It’s that easy! Every kit is assembled and tested prior to shipment – you’ll receive a working unit right out of the box unless damage occurs during shipment. If you have any questions or concerns regarding your order, please message me directly and I will do my best to take care of you! Currently being 3D printed with PETG filament for strong, long-lasting life, and very durable. At this time, please allow up to one week for shipment. I assemble these personally, as well as package and ship. Thank you so much for looking!