Location 196, Nagla 4th Road, Faridabad, Haryana
Have any questions +91 9818400280
Submit your requirement info@usedpowerpresses.in
Archive

Item Tag: <span>uxcell</span>

100mm x 100mm x 2mm Rectangle 1060 Aluminum Sheet Flat Metal Plate Stock 2Pcs

Description:1060 Aluminum Material Sheet – Aluminum content is higher than 99.00%, and has corrosion resistance, high plasticity, electrical conductivity, and thermal conductivity.Features – The 1060 aluminum plate has low mechanical strength compared to more significantly alloyed metal. However, it with good elongation and tensile strength. It can meet conventional processing requirements(such as stamping, and stretching).Wide Applications – Commonly used for which do not require particularly high strength. Especially for custom fabrication projects such as thin plate processing parts, welding parts, signboards, billboards, nameplates, tags, handicrafts, interior architectural decoration, exterior wall decoration, etc.Notice – The corners of the metal sheet are without chamfered treatment, please be careful and wear gloves to process it.

100mm x 100mm x 5mm Rectangle 6061 Aluminum Sheet Flat Metal Plate Stock

Description:6061 Aluminum Material – High strength, high toughness, corrosion resistance, good plasticity, oxidation effect, and processing performance.Features – The 6061 aluminum plate has high weldability and is suitable for hot forging into special and custom shapes. Besides, it with good elongation and tensile strength. It can meet conventional processing requirements(such as stamping, and stretching).Wide Applications – Commonly used for custom fabrication projects such as thin plate processing parts, welding parts, mechanical parts, model constructions, signboards, billboards, nameplates, tags, handicrafts, interior architectural decoration, exterior wall decoration, etc.Notice – The corners of the metal sheet are without chamfered treatment, please be careful and wear gloves to process it.

4pcs Rubber Mounts M6x18mm Male Vibration Isolator Shock Absorber D20mmxH10mm

Description:1. Compact and Stable – Simple geometry supports dynamic performance and stability under lateral (sideways) forces. In equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.2. Damping Element – As the damping element of welding machines and other equipment, it can protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.3. Applications – Wide use in gasoline generators, air compressors, welding machines, garage doors, flushing pumps, impact pumps, air conditioners, wall fans, washing machines, and generators.Specifications:Product Name: Rubber MountsMaterial: Metal, RubberColor: Black, Silver ToneMetal Surface Treatment: Zinc PlatedRubber Size: 20 x 10mm / 0.79″ x 0.

4Pcs M6 x 18mm Rubber Mounts 15 x 25mm Rubber Vibration Isolator with Nuts

Description:Material – The shock absorber mount is made of rubber and zinc-plated metal, and the flange nut is made of 201 stainless steel. The rubber and metal are firmly bonded and not easy to fall out. The vibration isolator mount is strong, wear-resistant, corrosion-resistant, not easy to break or rust, the thread is smooth and burr-free, and can be used for a long time.Compact and Stable – Simple geometry supports dynamic performance and stability under lateral (sideways) forces. In equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.Installation – The rubber bracket comes with flange hex nuts. The installation of the shock absorber bracket is simple, just put the equipment hole in the screw and tighten the nut of the isolator mount.

48pcs M6x18mm T-Nuts 4 Pronged Tee Nut Carbon Steel Threaded Inserts for Wood

Description:1. Usage: These threaded inserts provide a solid connection for a variety of DIY tasks, furniture restoration, and woodworking projects. Commonly used to fix cupboards, table and chair legs, etc.2. Advantages: It is made of color zinc plating carbon steel, has corrosion resistance, and has high strength. The 4 anti-claws are deeply inserted into the locked object, which is not easy to loosen.3. How to use: First make a hole according to the outer diameter of the rod, insert the outer rod of the pronged tee nut into the hole, hit the bottom of the nut flange with a hammer, let the 4 claws be inserted into the wood, and a nut connection is realized.4. Note: 1. Do not directly tap the thread to avoid making the thread unusable. 2.

4Pcs M6 x 18mm Rubber Mounts 8 x 20mm Rubber Vibration Isolator with Nuts

Description:Material – The shock absorber mount is made of rubber and zinc-plated metal, and the flange nut is made of 201 stainless steel. The rubber and metal are firmly bonded and not easy to fall out. The vibration isolator mount is strong, wear-resistant, corrosion-resistant, not easy to break or rust, the thread is smooth and burr-free, and can be used for a long time.Compact and Stable – Simple geometry supports dynamic performance and stability under lateral (sideways) forces. In equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.Installation – The rubber bracket comes with flange hex nuts. The installation of the shock absorber bracket is simple, just put the equipment hole in the screw and tighten the nut of the isolator mount.

Anti Static Wrist Strap ESD Antistatic Cordless with Spare Bracelet Wine Red

What is this?The anti-static wrist strap is used to discharge the static electricity of the human body and prevent the static electricity on the body from being transmitted to the accessories when you touch the accessories, causing interference. It is widely used in various industries such as LED touch screens, communication electronics, electronics manufacturing, electronic instruments, PCB boards, etc.What will I get?The anti static strap, we provide here, is in the size of:Wrist Strap Size: 175 x 20mm/6.9 x 0.8 inch (L*W)Buckle Size: 39 x 27 x 15mm/1.5 x 1.1 x 0.

M2.5 x 3mm Phillips Flat Head Screws Carbon Steel Machine Screws Black 500pcs

Description:Carburization + Black Zinc Plated screw are corrosion resistant, durable.Cross slot, uniform force,easy to lock, not easy to slip, more convenient and quick to use.Suitable for Machine computer case and equipment sheet metal cover mounting.Specification:Main Color: BlackMaterial: Carbon SteelFinish: Carburization + Black Zinc PlatedScrew Groove Type: PhillipsScrew Head Type: Flat HeadThread Diameter: M2.5Total Length: 3mm / 0.12″Screw Head Diameter: 4.2mm / 0.17″Note: The Screw Head Diameter is measured manually and there may be slight errors.Package Content:500(+/-2%) pcs x Phillips Flat Head Screws.

2 x M2.5 x 10mm S/S Socket Head Screws + 2mm Wrench. Gamo CAT/SAT Trigger Fix.

M2.5 x .45 x 10mm S/S Socket Head Cap Screws With 2mm Allen Wrench. I leave feedback for every buyer as soon as I see that payment has been processed. Once you have received your items from me, please take a minute and leave reciprocal feedback. Your honest feedback assist other buyers in deciding whether to trust me to provide a quality product. Fix your creepy, heavy Gamo CAT / SAT type trigger. I have been told a few times now that these work with the metal two stage trigger also. Condition is “New”. Ground advantage shipping is included! If you want it quicker, you can pay $4 extra for Priority Mail. Let’s face it. Trying to find metric screws in the USA isn’t great. Trying to find tiny metric bolts without buying 100 or more is a PIA! I’ll send you 2 of these (a spare or fix two triggers) and a 2mm Allen wrench for $8.50 delivered. I have the same one in my own Gamo Wildcat Whisper (the one in the pics) and it makes ALL the difference! ONLY DO THIS IF YOU ARE MECHANICALLY CONFIDENT!! I TAKE NO RESPONSIBILITY IF YOU MESS UP YOURSELF, YOUR PROPERTY OR YOUR RIFLE FITTING THIS SCREW !! Look behind your trigger to find the sear screw (see listing pics for reference). This should be a black Phillips (cross) head machine screw. Carefully remove this screw. Take your new stainless steel cap head screw and screw it in place of the original using the 2mm allen (hex) wrench supplied. Screw it in until you have about 3/16″ of threads showing, cock and load your rifle and try it out. With 3/16″ of threads showing, your trigger should be a little lighter than it originally was. If a still lighter feel is desired then go 1/4 to 1/2 a turn IN more and try again. Keep going until the desired feel is achieved. Once you feel happy with the trigger weight, again cock and load your rifle and then hit the butt of your rifle on something solid a few times. (Please do this outside) This will check that the sear is still safely engaged. IF YOUR RIFLE DISCHARGES FROM BEING KNOCKED / JARRED THEN YOUR TRIGGER IS TO LIGHT! Back off the screw 1/4 to 1/2 a turn and try again. Once your sear is safely engaged and you have a trigger you’re happy with, back the screw out approx. 10 turns (count them carefully) without fully removing it from the threads and add a small dab of thread lock about 1/8″ down from the screw head ( as shown in the pics). Purple,light hold and for less than 1/4″ or 6mm screws or blue, medium strength will work. Red, permanent will work too if you never intend to remove this screw again. It’s up to you! Thread lock is not included! I just took the picture to show you what I used myself. Turn the screw back into place, carefully counting the turns so that you get it back to the exact same setting. Test it again to check you got it back in the correct position and then leave your rifle (un-cocked and unloaded) overnight for the thread lock to cure. Welcome to your new rifle (or so it’ll feel like)