Item Tag: <span>ZIMI</span>

5 Pcs 4mm 4 Flute Regular Carbide End Mill 50mm Overall Length – TiALN COATED

Material of the Square end mill :Tungsten steel Nano Coating Square Carbide Milling Cutter;4 Flutes End Mill Cutter CNC Bits/set,Easier roughing and finishing processing Easier roughing and finishing processing;Offers high cutting performance and increases the wear resistance of the cutter.Adopting a suitable negative rake angle design, taking into account the strength and sharpness of the cutting edge. The use of a large core diameter increases the rigidity of the cutter and makes it stable in cutting.Package:5pcs end mill The processing diameter is 4mm, the effective cutting length is about 10mm, and the total length is 50mm. The handle diameter is 4mm and can be clamped using effective fixtures such as ER32-4/ER25-4

New 5 PCS – 3/16″ 4 FLUTE CARBIDE END MILL – TiALN COATED USA

Finish: TiALN. 3/16″ 4 Flute SE Stub. Manufacturer direct pricing. Lot of 5 PCS. Length of Cut: 1/2″. Center Cutting: Yes.

5 Pack 3/64″ Solid Carbide End Mills – TiALN Coated – 4 Flute CNC

4 FLUTE – SINGLE END. ALTIN COATED. SQUARE END.

NEW 1/2″ x 2″ x 4″ 4 Flute Long Solid Carbide End Mill – TiALN Coated USA

1pc 4 Flute 1/2″ x 2″ x 4″ End Mill. End Mill Bits are used for side milling, end milling, finish machining, etc. 4 Flutes, Single End, Helix Angle: 30°, AlTiN Coated. AlTiN Coated for improved performance and tool life in harder materials or high temperature applications.

LOT OF 5 PCS 1/16″ 4 FLUTE CARBIDE END MILL – TiALN COATED USA Free shipping！

End Mill Type: Ball Nose End Mill. End Mill Bits are used for side milling, end milling, finish machining, etc. Tool Coating: AlTiN Coated. ALCrN Coated for improved performance and tool life in harder materials or high temperature applications.

3/8″ x 1″ x 2-1/2″ 4 FLUTE SOLID CARBIDE END MILL – TiALN COATED USA

TiALN COATED. Hard alloys are known as “industrial teeth” due to their high hardness, wear resistance, strength, and excellent heat and corrosion resistance. IRREGULAR FLUTE SPACING、. 1″ LENGTH OF CUT.

5PCS 1/16″ 4 FLUTE CARBIDE END MILL – TiALN COATED USA Free shipping

Finish: TiALN. 1/16″ 4 Flute SE Regular. Manufacturer direct pricing. Length of Cut: 1/4″. Center Cutting: Yes.

5PCS 1/4″ 4 FLUTE LONG CARBIDE END MILL – TiALN COATED

Coating: AlTiN has a high aluminum content and excellent heat resistance, hardness, and oxidation resistance. HRC 45 degrees: Hard alloy milling tools are good at working on carbon steel (~HB225), alloy steel (HB225~325), pre hardened steel (up to HRC45), hardened steel (HRC40~45), and cast iron.

5 Pack 5/64″ Solid Carbide End Mills – TiALN Coated – 4 Flute CNC

4 FLUTE – SINGLE END. ALTIN COATED. SQUARE END.

Solid Carbide Boring Bar 1/2″ x 5.50″ C08-SCLCR2 + 10PX CCMT 21.51 Carbide blade

Solid Carbide Boring Bar 1/2″ x 5.50″ C08-SCLCR2 + 10PX CCMT 21.51 Carbide blade Free shippingThis is a high-quality knife holder made entirely of tungsten steel C08-SCLCR2 1/2″x 5.50″ OAL (CCGT 21.51) solid carbide non-coolant. NOTE: Actual shank length may be between 5.00″ and 5.50″ OAL. Min Bore .590″ When internal machining, the limiting factor on CNC turning centers or multi-task machines is often the rigidity (or lack thereof) of the boring bar. It is important to note that a carbide shank is nearly 3X more rigid than a traditional steel shank. While in the cut the steel shank deflects (pushes-off), even more so when extended beyond 3:1 (L/D) and when threading, machining difficult materials or interrupted cuts. This often results in poor surface finish, size variation, poor tool life and reduced machine utilization. The rigid shank minimizes vibration and can eliminate chatter. Tool life is preserved, resulting in fewer offset adjustments and insert indexes. Greater rigidity allows for parameter adjustments (speeds/feeds) to optimize cycle times. In a nutshell, your rigid shank will pay for itself over and over again, day in and day out. Reduced setup time (due to elimination of chatter), higher quality parts, less scrap, longer run times. Greater machine utilization and production means more $$$$ in your pocket at the end of the day. The package includes： 1PCS 1/2″ Solid Carbide Boring Bar 10PCS CCMT060204 Carbide High quality blade